METRIFORM

METRIFORM PANEL SYSTEM

SGB Metriform panels are steel framed with replaceable plywood infills and are supplied in Full and Half width options.

For floor and wall construction, this simple and economic method prevents the grout loss which is common with other systems and results in poor surface finishes. 

The double sided resin coated plywood gives long life as both sides can be used many more times than untreated plywood. The 70mm deep welded steel frame is of hot rolled, high yield stress steel to resist damage and site abuse.

Length x Width (m)

Weight (kg)

2.4 x 0.6*

39.8

1.8 x 0.6*

30.4

1.5 x 0.6

25.6

1.2 x 0.6

20.6

0.9 x 0.6

16.0

2.4 x 0.3*

26.7

1.8 x 0.3*

20.2

1.5 x 0.3

16.9

1.2 x 0.3

13.4

0.9 x 0.3

09.2

* Not normally used for floor construction.

 

 

 

 

 

 

 

 

Simplicity

Built-in simplicity with its resulting speed of erection, striking and dismantling is one of the outstanding features of the SGB Metriform system. 

Only a limited number of components are required for the construction of any type of wall and SGB Cuplok scaffolding is fully compatible as a Quick Strike supporting system for the use of the panels in floor construction.

 

Design Service

SGB technical staff are always available to advise on the use of SGB Metriform and to design and prepare complete schemes for its application. This specialist service is available without obligation.